Update to the Latest Software Version

The following procedure only needs to be done once per Net-Top-Box in your network:

1. Log into the Net-Top-Box and browse to:
   "Setup | Software Update | Settings" page / tab
2. Click "Automatically download and install updates"
3. Select a time when no one will be watching the screen for the allowed reboot time
4. Select a time period when no one will be using the Net-Top-Box for the allowed download times
5. Set the "Server URL" to:
   http://www.onelanftp.co.uk/software_update/
   The factory-shipped URL may be incorrect.
6. Enter the user name and password that we e-mailed to you.
7. Tick "Use Proxy" if the Net-Top-Box needs to use one
   (Ask your network Administrator for advice)

If the above procedure has already been done then your Net-Top-Box should have downloaded and installed the latest available software.

The following procedure needs to be done every time new software is released and on every Net-Top-Box in your network:

1. Click one of the links in the table above to download and save the appropriate update file.
2. The download will take several minutes on broadband connections. The file will appear on your computer once the download is complete.
3. Try the download again and if you are asked to overwrite the file but the size and date is identical then click "Cancel" because the file is fully downloaded.
4. If using Internet Explorer then check that it did not rename the file, if it ends in ".tar" then change it to ".opf".
5. Browse to the "Setup | Software Update | Manual Update" page / tab on the Net-Top-Box.
6. Click the "Browse..." button and locate the OPF file that you have just downloaded.
7. Click the "Upload" button and wait for the file to upload to the Net-Top-Box.
8. Do not browse away from the page during the upload. Be patient if the browser appears to freeze at the end of the upload.
9. When the upload is complete, do NOT pull the power cable out or turn off the electricity until the update process is complete.
10. Click the "Reboot" link to restart the Net-Top-Box, this may take up to 20 minutes.
11. After the Net-Top-Box has rebooted it will be running the new software.
12. Repeat all the steps above until the Net-Top-Box is running the latest software.