Instructions
-
Make a note of which cables are connected to where on the NTB.
-
Unplug all cables from the NTB and take it to close proximity of one of the Display Devices.
This is a temporary measure.
-
Connect the NTB directly to the Display Device with a VGA cable.
-
Connect the NTB to the Network with a network cable or to a laptop with a cross-over cable.
-
Connect the NTB to the mains electricity.
-
Click on the link below and then, when you are done, reinstall the NTB according to the notes that you took in step 1.
-
Follow this link.
