Troubleshooter > Connect > Restore Default

Notes

• The NTB may have been configured into a state where it simply cannot be contacted.The circumstances could include:
• An incorrect static IP address has been set.
• Passwords have been forgotten.
• The NTB's firewall has been set incorrectly.
• It is possible to restore the NTB to it's factory default settings.This procedure will not delete any content.

Instructions

1. Attach a keyboard to the NTB (purple jack).
2. Press Ctrl-Alt-F1.
3. Type the NTB user name: "maint", and press the Enter key.
4. Type the NTB password: "maint" (characters will not appear on the screen) and press Enter.
5. If the above failed try "onelan", "onelan" instead.
6. Type the number of the menu option to reset to the desired factory settings.
7. Type "yes" to agree to this change.
8. Type "0" to exit from the maintenance menu.
9. Type "yes" to allow the system to reboot.
10. Once the system has rebooted you should be able to connect to it.

Resolution

Problem Solved.

Problem still not solved: E-mail Technical Support. No e-mail? 01491 845286. Quote: Restore Failure 3350

© Copyright 2008, ONELAN Limited.

Email: support@onelan.co.uk

Tel: +44 (0)1491 845286